Parameters
Model | LP-M1325P/LP-M1530P |
Working area(mm) | 1300 x 2500/1500*3000 |
Power supply | LGK(China), Thermadyne or Hypertherm (Import from USA) |
Plasma currency | 60A/120A/160A/200A |
Control system | DSP or Beijing Start |
Cutting thickness | Depend on plasma currency |
Cutting speed | 100-8,000mm/min |
Moving speed | 0-50,000mm/min |
Precision | ±0.1mm |
Repeating precision | ±0.8mm |
Power | 8.5-10.5kw |
Voltage | 380v/50Hz |
Working atmospheric pressure | 0.65-0.7Mpa |
Communication interface | USB port |
Arc pressure adjuster | Hipost AHC-2C |
Software support | FASTCAM, AutoCAD, Type 3 etc. Software |
Instruction format | G code |
Transmission system | X Y axis Taiwan Hiwin high precision square rail way, zero clearance square model aggravating sliding linear guide rail and rack pinion Z axis arc voltage adjusting controller |
Drive system | Three phase stepper motor |
Air compressor | With 3000w |
Suitable for | Iron, aluminum, galvanized sheet, titanium plate, stainless steel |
Cutting thickness(Just for reference)
Plasma current | Cutting ability |
China 60A | Less than 3mm |
Imported 60A | Less than 6mm |
China 100A | Less than 18mm, quality cutting less than 12mm |
Imported 100A/ 120A | Less than 20mm, quality cutting less than 18mm |
China 200A | Less than 30mm, quality cutting less than 22mm |
Imported 200A | Less than 38mm, quality cutting less than 25mm |
Equipment Features:
1). This machine adopts thick square tube wholly welding; the machine body adopts shaking preventing technical disposal, with the features of firm, shape retention, and high rigidity.
2). Reasonable platform design, the flat table adopts 10mm precision process steel plate install on the machine table, and then install precision process cast iron cover to protect the vertical steel, to prevent the steel plate affected by high strength flame. The level difference of whole double-deck platform remains in 0-1.5mm.
3). Reasonable pitch leaks design, to make the work piece and other fragments slide to the sides of the knife rack, safe and convenient to use.
4). This machine adopts Japanese Panasonic servo motor and high precision gear wheel. The noise is low, and the machine runs steadily.
5). This machine adopts Start control system made in Sino-US joint venture and Germany design Software FASTCAM with auto material saving function
6). The machine adopts American Cut-Master power source (power 60A/120A/200A) together with high sensitive arc pressure adjuster. Self-adjusting to choose the best distance between plasma head and work piece automatically in order to ensure cutting accuracy
7). Perfect reasonable design and high immaculate surface's work piece make the machine best choice for different thickness material and heterotypic sheet cutting