portable cnc gantry crane plasma flame cutting machine plasma cutter

DESCRIPTION:

CNC cutting machine is a kind of equipment which dedicated to a variety of carbon steel, stainless steel, aluminum, copper and other metal materials. The equipment in the industrial computer control, adopt high-temperature plasma arc or flame cutting on the plate can be cut in any graphics and text, it is widely used in shipbuilding, pressure vessel manufacturing, machinery manufacturing, steel processing industries.

When using a plasma arc cutting, not only can cut carbon steel, but also cutting stainless steel, aluminum, copper and other metal materials, maximum cutting thickness determined by the plasma source with the decision. Normally, the device used by the U.S. sea treasure produced plasma power, plasma cutting speed relative to the oxyacetylene cutting speed, high efficiency, effectively reduce the overall cost.

When using oxyacetylene or other oxyfuel, only cutting carbon steel, cutting thickness 6 ~ 200mm, such as the use of special cutting torch, cutting nozzle and specialty gases, gas, maximum cutting thickness up to 300mm. Oxyfuel cutting, plasma cutting with respect to the slow, but a thick steel plate can be cut, and the use of low cost.

The device mechanical structure gantry form, from the main end beam, secondary-side beams, and beams composed of portal frame, driven by AC servo motor,walking on the rails. CNC cutting trolley through the slider fixed to the beam front, driven by a servo motor, through the gear rack drive, walk by the linear guides.

The device is also equipped with automatic torch height adjustment device and automatic arc ignition device, the use of automatic nesting software programming, enabling automatic control of the cutting process.

Equipment used graphics file programming language international common CNC Programming Language - G code language. G-code file can be edited manually, or use the device supporting FASTCAM automatic nesting software programming or other programming software for automatic programming and nesting, easy programming, sheet utilization.

SPECIFICATIONS:

1. The machine body

It is gantry type structure. The cross beams treated by whole annealing to eliminate stress so it has good rigidity and high strength without permanent deformation.

2. The vertical rails

The vertical guide track adopts heavy rails. The surface has high precision after grinding . The rail length can be increased and decreased according to the requirements of users;Rails using 38Kg / m rail processed from the top surface and the side after grinding with high straightness and parallelism; foundation generally use concrete structure ( also available in steel )

3. The cutting torch holder

The cutting torch holder adopts the collision-preventing design to ensure the cutting torches are not damaged in production.

4. The horizontal rails

The horizontal guide track adopts a straight line track with high precision and smooth running.

5. The travel reducer

The travel reducer adopts German high precision planet gear reducer.

6. The driven system

The driven device adopts the full-digital AC servo system and motor made by Japan Panasonic which has high running precision.

7. Regulator of auto height regulator

The machine has many functions such as automatic position, automatic perforation, and automatic height-regulating device of capacitance. The plasma cutting machine is equipped with USA imported arc voltage height-regulating device.

8. Program and nesting software

FastCam from Australia

9. CNC system

It is equipped with famous brand USA START Control system

10. The track gauge

The machine with below 4m gauge adopts single side driven, the machine with above 4m gauge adopts double-side driven to guarantee its precision an high speed smooth running.

11. Cutting power

USA Hypertherm (USA Cut-master optional)

PARAMETERS:

Cross Beam width	2700mm(Can be widen according to user's demand)
Longitudinal Rail Length	7500mm(Can be lengthened according to user's demand)
Effective Cutting Width (X axis)	2200mm
Effective Cutting Length (Y axis)	6400mm(Rail can be lengthened according to user's demand)
Cutting Mode	Flame &Plasma
Drive Mode	Dual-side
Drive Method	Rack and pinion drive for X and Y axes
Flame Cutting Thickness	6-180mm
Plasma Cutting Thickness	0.3--20mm( Depends on plasma power source capacity)
Power source supply	60A/100A/120A/200A
Traveling speed	20000mm/min
Cutting Speed	0-12000mm/min
Positioning accuracy	0.01mm
Repeatability	+-0.05mm
Power Source	380V 50/60Hz
Power capacity	25-50KW according to different power source
Cutting Gas	Acetylene,Propane,oxygen
Plasma Gas	Pressed air,Oxygen,N2
Nesting Software	FASTCAM
Torch Height Controller (AUTO)	US-START(Arc voltage height control for plasma cutting)

Our Services
1.24 months quality guaranty, the machine with main parts(excluding the consumables) shall be changed free of charge if there is any problem during the warranty period.
2. Lifetime maintenance free of charge.
3. Free training course at our plant.
4. We will provide the consumable parts at an agency price when you need replacement.
5. 24 hours on line service each day, free technical support.
6. Machine has been adjusted before delivery.
7. Our staff can be sent to your company to install or adjust if necessary.