Voltage: 380V three phase
Rated Power: 8.5KW
Warranty: 2 Years
After-sales Service Provided: Engineers available to service machinery overseas
Maximum cutting speed: 8000mm/min
Torch Height control mode: Automatic High sensitive THC
Plasma power supply: depend on customer's material thickness
Cutting thickness: Depend on plasma source power
Control system: STARFIRE/START/SJTU-CNC etc.
Motors: Stepper motor/servo motor
Feauture: Marking & Cutting
LCD Display Dimension: 7.0Inches
|X,Y working area||1500*3000mm|
|Z working area||150mm|
|Lathe bed||Very thick steel structure|
|Working voltage||380V/50HZ three phase|
|Maximum cutting speed||8000mm/min|
|Torch Height control mode||Automatic High sensitive THC|
|Plasma power supply||depend on customer's material thickness|
|Cutting thickness||Depend on plasma source power|
|Control system||STARFIRE/START/SJTU-CNC etc.|
|Motors||Stepper motor/servo motor|
|Plasma Air Pressure||Max.0.8Mpa|
|Working Temperature||-10°C-60°C. Relative Humidity, 0-95%.|
|LCD Display Dimension||7.0Inches|
1. We do this line many years ,have rich experience and professional knowledge ,will let you get the most suitable machine with the right configuration . This ability can let you avoid many mistake and avoid some trouble .Other factory usually lack this experience ,and bring some trouble for the real customer .
2. We have detailed teaching video for customer, like step by step and hand by hand to teach how to use machine and software .etc, so even a freshman will learn machine using faster and easier.
3. Our machines have been professional anti-rust treatment,Are sprayed 2 times anti-rust paint to ensure that all parts of the machine in a fully protected state,And then spray the color.
1. Q:How can I get a most suitable machine?
A: Friend, you just can tell us below questions:
1) What metal material you need to cut?
2) What is your material max width,max length, and max thickness.
Then we will know which model suitable for you.
2. Q:How about the payment terms?
A:We support T/T, L/C, Alibaba trade assurance, West Union,etc.
You can send 30% as deposit, and then we will produce your machine, after machine finished, we will take machine pictures
And record video for your confirmation. After you confirm, Pay the balance.
3. Q: How we buy a suitable Air Compressor to fit in CNC plasma cutting machine?
A: This type machine, we will free give customer a Air compressor(Value USD410),and set all the parameter in the Air compressor well, so you no need to spend money to buy it, and can use machine directly when received machine; This is also our Advantages, while most other factory no equip it.