Model Number: AL-XG2230
Rated Power: 7.5kw
Warranty: one year
After-sales Service Provided: Engineers available to service machinery overseas
Cutting Pipe Diameter range: 50-600mm
Cutting Mode: Flame/Plasma
Plasma power: Germany Ruiduncnc
type: tube Plazma Cutting Machine
cutting precision: 0.5mm
transfer mode: USB disk
|Effective cutting range||500-12000||mm||Can be customized|
|Cutting diameter range||50—600||mm||Can be customized|
|Cutting thickness||3—25||mm||Can be customized|
|Vertical maximum speed||10||m/min|
|Chuck rotation maximum speed||15||r/min|
|Minimum length of waste||50||mm|
|Maximum lift height torch||350||mm|
|Support bracket height adjustment mode||Manul|
|The minimum distance between the support bracket||250||mm|
|The number of support bracket||3|
Tube Plazma Cutting Machine Machnical system
1) linear motion that plasma or flame torch makes along unprocessed tube axis (Ⅰaxis -X-axis): servo motor drives longitudinal bracket by reducer to move the torch head and torch on the longitudinal rails.
2) Lifting motion of plasma or flame torch (Ⅱ axis -z axis): servo motor pushes torch head and its torch through reducer to realize the lifting motion.
3) Jigging motion that plasma or flame torch makes along unprocessed tube axis (Ⅲ axis - A axis): servo motor drives torch head and its torch through reducer to turn round.
4) Jigging motion that plasma or flame torch makes along the vertical of unprocessed tube axis(axis-B-axis): servo motor drives torch head and its torch through reducer to turn round.
5) Rotary motion of unprocessed tube(V axis-W axis): servo motor drives chucks to make steel tube to make rotary motion.
6) Reducer adopted high precision planetary gear, to ensure high precision of transmission
7) Tube supporter adopted hand-cranked movable wheel frame with adjustable height of center
Main functions of tube Plazma Cutting Machine
- 1.Pipe cut anywhere, straight mouth or bevel
- 2.Pipe anywhere orthogonal, oblique, eccentric combinations of curves intersecting hole nesting program.
- 3.Pipe anywhere orthogonal, oblique, eccentric intersection curve straight and bevel cutting.
- 4.Parameterized type of intersection curve Gallery.
- 5.Fully-automated cutting process
- 6.Simulations and cutting process synchronization display.
- 7.Kerf automatic compensation
- 8.Pause, continue to cut and the cutting process acceleration/deceleration control.
- 9.Automatic arc,automatic perforation, automatic height-adjustment
- 10.Midway breakpoint site protected memory
- 11.Each control shaft automatic location.
- 12.Working process of automatic fault diagnosis and alarm
Application of tube Plazma Cutting Machine
To be used to cut thick tube and pipe of carbon steel(flame),stainless steel, alloy steel, aluminum, and other metal materials, applied in areas including ship building, pressure vessel, aerospace, bridge construction, steel structure , electronic power and engineering machinery.
Gas circuit system
Pneumatic solenoid valve device using Italy, Taiwan brand valves, high quality composition and gas lines. According to oxygen, gas cutting characteristics, advantages of integrated pneumatic system design of the same industry, Automatic gas path system for fast preheating, perforation, automatic conversion of high efficiency and energy saving and other high energy-efficient requirements.
- 5.1 Gas circuit system for the central gas gathering form, controlled by gas circuit dashboard.
- 5.2 Plasma using arc voltage height controller automatically adjusts the torch height to ensure the safe and efficient when cutting.
- 5.3 Gas circuit system with automatic conversion of high and low pressure, backfire prevention functions, ensuring safe and efficient cutting.
Tube Plazma Cutting Machine Working Environment
- 6.1.Plasma required compressed air not less than 0.8MP.
- 6.2.Temperature : -5°C ~45°C
- 6.3 Relative humidity : ≤0.95